Jatoba angulo 8 – Mounting bracket for power strips

$33.61

plus shipping

Delivery Time: not specified

Mounting bracket for 19“ 1HE 8-outlet power strips
To supplement the 1st tier of the Blackpanthersystem
Ready for mounting a power strip
Expandable for a second 8-outlet power strip (for a total of 16 sockets)

Item-No.: 8766 Category Spare parts

The article in Detail

Jatoba angulo 8 – Mounting bracket for power strip

With the Jatoba angulo 8 mounting strip you can mount almost any 19-inch 1U power strips available worldwide to your BlackPantherSystem where the side angles can be turned and re-mounted by 180 degrees. This combination is the ideal addition to your Blackpanther setup. It couldn’t be more compact. The usual “cable clutter” will be a thing of the past. You can quickly connect all your equipment such as keyboards, synthesizers, effect devices, pre-amps and amps and more conveniently to your power strip. No cable clutter on the floor.
The power strip is not included.

The mounting bracket is made of high-quality sheet steel and is powder-coated with RAL 9005.

READY AT ALL TIMES

easy assembly for the 1st tier of the Blackpanthersystem
includes screws to mount a 19 inch 1HE power strip
ready to expand for a second power strip with the Jatobo angulo extension mounting bracket

THE MATERIAL – ONLY THE BEST FOR YOU

nicely structured surface finish
high-quality sheet steel
easy care and maintenance
ergonomic wing nuts

Assembly – easily explained

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

Always unblock YouTube

The mounting bracket is very easy to mount.

Take the mounting bracket and hang it from the back onto the 1st tier of the keyboard stand.
Put both locking screws, left and right, through from above and tighten everything with the wing nuts.

Uses

The mounting bracket Jatoba angulo holds your 19 inch 1U power strip. It is the ideal addition to your BlackPanther setup for mounting your power strip. It is mounted directly onto the first tier of your keyboard stand. With the mounting bracket and a 19-inch 1U power strip, you can forget about the usual “cable clutter”. You can quickly and conveniently connect all your equipment such as keyboards, synthesizers, effect devices, pre-amps and amps and much more to your power strip. No cable clutter on the floor.

Material and care

The mounting bracket Jatoba angulo 8 is made of powder-coated sheet steel and is already very robust. However, just like any coating, the surface is not completely scratch-resistant.

So that you can enjoy your BLACKPANTHERSYSTEM for a long time, use a damp cloth with a mild and non-abrasive cleaning agent for cleaning. Afterwards, wipe with a dry cloth.

Questions and Answers

For what type of power strips can the mounting bracket be used?

The mounting bracket Jatoba angulo 8 is a universal mounting solution for all 19 inch 1U power strips. You can attach all international power strips of this type to this mounting bracket. Prerequisite is that the mounting brackets to the left and right of the power strip are mounted in such a way that a rear mount is possible. Most of the mounting brackets on power strips are mounted forward. However, in the most cases, these can be easily reassembled so that the bracket sits flush with the back of the socket strip. Please check the possibility for reassembly before you purchase your power strip. The power strips offered in our shop are already reassembled in such a way that you can immediately attach them to the Jatoba angulo 8 mounting bracket.

I need more than 8 outlets – is there a way?

Yes, in this case you can order the expansion kit Jatoba angulo Extension for your mounting bracket. With it you can then mount a second 19 inch 1HE power strip. You will then have a total of 16 complete power sockets.

Can I retrofit the mounting bracket and the socket strip later?

Yes, you can always do that. The BlackPantherSystem is designed in such a way that you can always easily and effortlessly add any of the accessories at any time.